Tender Documents for the Internet Broadband and Inter-Provincial Dedicated Line Project

Chapter One      Invitation to Tender

X X Company:

Our company is conducting an open tender for Internet broadband services and inter-provincial dedicated lines. The tendering conditions are now in place, and qualified potential bidders are welcome to submit bids.

1 1. Tender Number: YLIT-2025-0617

2 1. Project Name: Internet broadband and inter-provincial dedicated lines

3 Project details: one 100 Mbps internet broadband line with one IP address, and one 20 Mbps inter-provincial dedicated line.

4 Bidders participating in the tender must carefully read the Instructions to Bidders and all other contents of the Tender Documents to avoid any errors.

5 , Submission of Bidding Documents

5.1 Submission Deadline: Bidding documents must be submitted and the corresponding bid bond of RMB 5,000 paid no later than 12:00 noon on July 10, 2025. The bid bond shall be transferred from the bidder’s basic account to the following account, with the remark “Bid Bond for [Project Name]” clearly indicated on the remittance slip. Submissions received after the deadline will not be accepted. The bid bonds of unsuccessful bidders will be Announcement of Tender Results The bid bond shall be refunded within 30 days; the successful bidder’s bid bond shall be converted into a performance bond and refunded upon expiration of the performance period.

5.2 Submission Location: Room 305, Party and Mass Work Department, Office Building of China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

Account Name: China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

Account-opening Bank: Liujiang Xinxing Sub-branch, Agricultural Bank of China Co., Ltd.

Bank account: 2013 2401 0400 0157 1

6 1. Bid Opening Time and Venue: The bid opening is tentatively scheduled for 2:00 p.m. on July 10, 2025, in Conference Room 309 of the Office Building of China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

7 1. Contact and inquiry telephone numbers and mailing address:

Unit: China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

Address: No. 12, Leye Road, Xinxing Industrial Park, Liujiang District, Liuzhou City

Postal Code: 545112

Telephone: 0772-3269380

Email: 68161277@qq.com

Contact: Wang Zhiwei / 18977240656

Chapter 2      Instructions to Bidders

1 1. Preliminary Schedule of Instructions to Bidders

2 1. Bidding Instructions条款

2.1 Party A: the tendering party, namely China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

Party B: Bidder

2.2 Bidding-related qualifications and bidding documents:

A copy of the business license, a power of attorney, copies of the identification cards of the legal representative and the authorized representative, a copy of the remittance slip for the bid bond, and other supporting documents that demonstrate the bidder’s capabilities, among others. All the aforementioned documents shall be bound in the specified order.

2.3 The bidding company must be a nationally approved telecommunications operator.

2.4 The scope of this tender is: Internet broadband and inter-provincial dedicated lines Project 。

2.5 Bidding Quotation: A detailed quotation shall be provided in accordance with the attachments to Chapter 8 (prices are inclusive of tax).

3 , Expense Settlement

3.1 Payment Terms: Party B shall provide Party A with the telecommunications invoice for the preceding month. Upon receipt of such invoice, Party A shall remit the corresponding amount to Party B via bank transfer within 30 days.

4 , Performance Bond

To ensure the performance of this Agreement, the Bidder’s bid bond shall be converted into a performance bond. If the Bidder unilaterally terminates the Contract prior to its completion, the Tenderee shall not refund the Bidder’s performance bond. However, if the Services are rendered in full compliance with the Contract and upon the expiration of the Contract Term without any disputes between the Parties, Party A shall refund Party B’s performance bond within 30 business days.

5 , Quality Control

5.1 Party B shall perform the construction works in accordance with the scope of the winning bid and shall ultimately pass Party A’s acceptance inspection. For the installation of equipment that is subject to inspection by the state or relevant industry authorities, Party B shall handle the requisite procedures in compliance with the applicable inspection requirements of the state or such authorities and ensure that the equipment passes the corresponding acceptance inspection.

6 , Liability Protection

6.1 Party A’s Responsibilities:

(1) Provide the site required for construction.

(2) Upon the construction conditions being met, Party A shall notify Party B one day in advance to commence construction.

6.2 Party B’s Responsibilities:

(1) Party B shall be responsible for organizing construction in accordance with the scope of the winning bid and the schedule specified by Party A, and the work must ultimately pass Party A’s acceptance inspection.

(2) If Party B provides Internet broadband and inter-provincial dedicated lines If the performance fails to meet the requirements stipulated by national or relevant industry inspection authorities, Party B shall bear liability for breach of contract, and shall fully compensate Party A for any economic losses incurred as a result.

6.3 Upon entering Party A’s construction site, Party B’s personnel shall comply with Party A’s relevant management regulations, provide and use qualified safety equipment and personal protective equipment, ensure safe and civilized construction practices, and adhere to applicable occupational safety and health regulations. Any occupational safety accidents occurring during construction or any personal injury or property damage caused to third parties shall be the sole responsibility of Party B.

6.4 Bidders shall carefully review the tender documents, fully understand the name, purpose, quantity, quality, and delivery date of the tendered project, and thoroughly comprehend the qualification requirements that bidders are required to meet.

6.5 Bidders shall not collude with one another in submitting bid prices, nor shall they engage in conduct that undermines fair competition among bidders and infringes upon the legitimate rights and interests of the procuring entity or other bidders. Bidders shall also not collude with the procuring entity in bidding, thereby harming the interests of the procuring entity or the legitimate rights and interests of others.

Chapter 3 Bid Opening

Party A shall conduct the public bid opening at the prescribed time and in the designated venue, and shall invite the legal representative (or head of the entity) of each Party B, or their duly authorized agent, to attend on time. Personnel representing the bidders at the bid-opening meeting shall be thoroughly familiar with the contents of their submitted bids, so as to facilitate the answering of questions and clarification during the evaluation process. Failure by a bidder to attend the bid-opening shall be deemed as acceptance of the bid-opening results.

Chapter Four Bid Evaluation

1 1. Party A shall organize relevant professionals to conduct the bid evaluation, which shall be conducted in accordance with the principles of fairness, impartiality, scientific rigor, and selection of the best proposal. The “Comprehensive Evaluation Method” shall be adopted. The members of the Bid Evaluation Committee shall comprehensively evaluate the bid documents and commitments submitted by all bidders, and determine the winning bidder based on the ranking of scores determined in accordance with the preliminary evaluation results and the detailed scoring criteria for the comprehensive evaluation, from highest to lowest. No explanations shall be provided to unsuccessful bidders.

2 1. If a tender document falls under any of the following circumstances, the Evaluation Committee shall treat it as non-responsive to the tender documents or as an invalid bid:

1 ) The sample does not comply with the requirements stipulated in the tender documents;

2 ) Where the tender document is not stamped by the bidder, or where it is not signed or stamped by the legal representative or by an authorized agent duly authorized by the legal representative;

3 ) Not sealed or completed in the prescribed format, with incomplete content or illegible key information that cannot be identified;

4 ) Where a bidder submits two or more quotation documents with differing contents, or includes two or more quotations for the same procurement item in a single quotation document without specifying which one is valid, except where alternative proposals are submitted in accordance with the provisions of the tender documents;

5 ) The bidder’s name or organizational structure is inconsistent with the qualification review;

6 ) The bidder fails to provide the bid bond as required by the tender documents;

7 ) Where the content of the tender documents submitted by different bidders is abnormally consistent;

8 ) Where the tender documents of different bidders are intermingled;

9 ) Where different bidders entrust the same person to submit bids;

10 ) Where different bidders use the same individual’s or enterprise’s funds to pay the bid bond;

11 ) Failing to comply with the substantive requirements set forth in the tender documents, such as delivery schedules, quality standards, and warranty periods;

12) Providing false materials to obtain the bid;

13 ) Any other activities intended to compromise the fairness of the tender outcome.

Chapter 5 Contract Terms

1 The tenderer and the successful bidder shall, within three days from the date of issuance of the Notice of Award (subject to the specific requirements of the tenderer), enter into a written contract in accordance with the tender documents and the successful bidder’s tender submission; the construction period shall be calculated from the date on which the Notice of Award is issued. If the successful bidder, without just cause, refuses to sign the contract, imposes additional conditions upon signing, or fails to submit the performance bond as required by the tender documents, the tenderer shall have the right to disqualify the bidder, and the bid bond shall not be refunded. Furthermore, if the losses incurred by the tenderer exceed the amount of the bid bond, the successful bidder shall also compensate for the excess.

2、 The successful bidder shall complete the awarded project in accordance with quality assurance requirements and shall not sub-contract or further sub-contract the project to any third party; otherwise, such conduct shall be deemed a breach of contract, and the tendering entity or relevant authorities shall have the right to terminate the contract.

Chapter Six On-site inspection

During the bidding period, the bidder shall be accompanied by personnel dispatched by the tendering party for an on-site inspection at the premises of China National Heavy Duty Truck Group Liuzhou Yunli Special-Purpose Vehicle Co., Ltd.

Chapter 7 Preparation of Tender Documents

1、 The bidder’s tender document consists of three parts: qualification certification documents, the technical section of the tender document, and the commercial section of the tender document. 。

1.1 Qualification Certification Documents

1 ) Copy of business license;

2 ) Power of Attorney;

3 ) Photocopies of the legal person’s and the authorized representative’s identification cards;

4 ) A copy of the bank transfer slip for the bid bond.

2 , Technical Section

2.1 Construction Organization (Please indicate whether on-site personnel are stationed)

1 ) Measures to ensure maintenance efficiency;

2 ) Technical organizational measures to ensure the quality of repair work;

3 ) Technical and organizational measures to ensure safe operations;

4 ) Technical and organizational measures to ensure civilized construction;

2.2 Project Management Organization: The project team is fully staffed, with robust technical expertise across all disciplines.

2.3 Corporate Reputation and Strength: Recent three-year track record of similar projects.

3 , Business Section

3.1 Letter of Bid;

3.2 Bidding Price Summary Table;

3.3 Internet broadband and inter-provincial dedicated lines Quotation list;

3.4 Bidder’s Undertaking

Note: For forms provided in the tender documents, fill them out in the prescribed format; for those not specified, bidders shall prepare their own forms, provided that they include the aforementioned contents. ; The above three sections shall be bound into a single bidding document.

Bidders shall, in accordance with the enterprise qualification requirements and their bidding intentions, provide quotations for all items listed in the “Quotation List for Internet Dedicated Lines and Inter-provincial Dedicated Lines” as required.

Chapter Eight Attachment   

Explanation:

1 1. Bidders must carefully complete and submit the attached documents in this section.

2 1. Clear responses shall be provided to the requirements set forth in the attached document;

3 The signatory of the attached documents shall warrant that all responses to inquiries, all statements made, and all qualification and credential documents and materials submitted are true and accurate.

4 The tendering entity shall maintain the confidentiality of the documents and materials submitted by bidders; however, such materials will not be returned.

5 1. All attached documents shall be written in Chinese and shall form part of the bidding documents.

Attachment 1:

Bid Opening Summary Table

Note: The quotation shall include all costs, including labor costs, material costs (except where materials are explicitly excluded), construction equipment usage fees, profit, and management fees.

Bidder’s Name (Seal)                                 

Signature of the legal representative or authorized agent:                        

day         Period:

Appendix 2:

Quotation List

Note: The term of this quotation contract is 12 months. Bidders shall not modify the contents of the bill of quantities or delete any items therein. If the bill of quantities is incomplete, corresponding items may be added; however, all additions must be numbered in strict accordance with the sequence specified in the bill of quantities. Any deviations must be documented on a deviation form. For items involving materials, the relevant brand and specification/model must be provided.

Bidder: (Seal)

Legal Representative (Authorized Agent): (Signature)

Date:        year     month     day

Appendix 3:

Deviations Table for Commercial Terms

Project Name:                          Tender Number:              

Bidder: (Seal)

Legal Representative (Authorized Agent): (Signature)

Date:        year     month     day

Attachment 4

Technical Specification Deviation Table

Project Name:                              Tender Number:              

Bidder: (Seal)

Legal Representative (Authorized Agent): (Signature)

Date:        year     month     day

Appendix 5

Project Performance Overview

Project Name:                            Tender Number:              

Note: Provide performance records for similar projects over the past three years. and attach a copy of the contract.

Bidder: (Seal)

Legal Representative (Authorized Agent): (Signature)

Date:        year     month     day 。